China Gypsum Board Making Line

The brief introduction of gypsum board production /making line:

The gypsum board production line take gypsum plaster for building purpose as the main raw material, mix it with chemical additives and water, continue pours into the space between two shielding tissue, through edge sealing, pressure, coagulation, cut, dry and so on, which make the light building materials. The characteristic of our gypsum board production line include low energy consumption, no pollution and quick construction.

Advantage of Gypsum Board Making Line:

The big advantage is the dryer system, which is the most important section in gypsum board production line and also a key link to ensure of finished boards’ quality. It consists of entry part, closing part, exit part, hot air circulation system,etc and its layers and length depend on different board capacities. With their own separate hot air cycling, this system is divided into two areas: after entering the mixing room, the high temperature gas generated by heating supplying system mixes with the circulating air in the duct, enters into the closing part by circulating fan and finally dry the wet gypsum boards. Meanwhile, the gypsum boards runs slowly in the drying system and are evenly evaporated so that the water content of final gypsum board product can be kept at 5%-10%. In addition, to increase the efficiency and decrease the noise and electricity consumption,we change the circulating fan type and use Japan technology. With the perfect automatic operation and manual board-exit process, it can be easily operated.