Double Servo Auto Cutting Machine

The Double Servo Auto Cutting Machine produced by our company are of stable quality, with few failures and simple operation. If you want to inquire about the price of Double Servo Auto Cutting Machine, you are welcome to contact us.

Double Servo Auto Cutting Machine Features:

1. The cutting machine controls the cutting of wet gypsum board with fixed length while board length reaches the required length, length fixing device sends signal to let up and down cut blades move to complete cutting of gypsum board.

2. The cutting machine's drive system adopts double servo motors, which together with servo controller&PLC controller to realize board length control automatically, accurately.

Double Servo Auto Cutting Machine Maintenance:

1. Always check whether the photoelectric switch is covered to result in non-sensitive; always clean up the gypsum board debris generated while cutting.

2. When the blade is damaged or passivated, reground and replace it. Please note that the two blades are aligned in a straight line, leaving a gap of 2-3mm between the blades. After replacement, the blade rollers can be rotated by manual to check if the gap is proper, then put into production.

3. When leaving the factory, its gearbox is not filled with lubrication oil, and it must be filled before use (50#-70# industrial gear oil). Change the lubrication oil after running for 2000 hours for the first time, and change the lubrication oil after every 5000 hours of operation.

4.The bearings on both end of blade rollers shall be filled with 2# Lithium base grease.

Hot Tags:  Double Servo Auto Cutting Machine.