Your Choice of Product
The gypsum powder, first is sent to silo by bucket elevator, then it is fed into dosing silo; after measuring accurately, the powder is fed into mixer. The raw material and water are well-mixed into slurry and poured into shaping machine. Then hydraulic station drives hydraulic lifting system to take gypsum blocks out from mould. At the same time, the space clamp clamps, lifts and transports blocks to trolley, which goes through the rails to drying kiln to dry. The whole system is controlled by PLC.
The gypsum powder, first is sent to silo by bucket elevator, then it is fed into dosing silo; after measuring accurately, the powder is fed into mixer. The raw material and water are well-mixed into slurry and poured into shaping machine. Then hydraulic station drives hydraulic lifting system to take gypsum blocks out from mould. At the same time, the space clamp clamps, lifts and transports blocks to trolley, which goes through the rails to drying kiln to dry. The whole system is controlled by PLC.
Capacity
100,000m2/y-450,000m2/y
Automation
Full automatic
Fuel
Natural gas, heavy oil, coal and diesel
Drying method
Dry by air
Hot air stove drying system
Main raw materials
Gypsum powder, water
Product dimension
Thickness: 70mm-200mm
Width: 300mm-500mm( adjustable)
Length: 620mm,666mm
We can design and manufacture products of other dimensions as clients'special requirement
Standard of product quality
In conformity with national standard JC/T698-2010
Related Products:Gypsum Board Production Line,Gypsum Powder Production Line,Gypsum Block Production Line,steel structural workshop.
Processing demand survey
x
