Gypsum Ceiling Board Production Line

China Gypsum Ceiling Board Production Line Manufacturers and Suppliers.Our company has perfect design, professional team, and the competitive price.

Process of Gypsum Ceiling Board Production Line

Calcined gypsum powder, water and various additives are automatically and separately measured and conveyed into the mixer. After well mixed into slurry and spreaded onto the gypsum board protective paper which is continuously moving forward. When going through shaping machine, the slurry is fully wrapped by upper and lower paper, pressed into well-regulated gypsum board which is brought forward as per a stable and strictly controlled speed.

After the calcined gypsum in the slurry is hydrated again and crystallized into tiny interpenetrative dihydrate gypsum crystal with higher strength. And then, the wet gypsum board with a certain strength and regular shape is precisely cut into pcs with fixed size by an auto-controlled knife. The individual boards are orderly arranged, turned over by PLC control system and brought into the dyer.

In the dryer, the absorbed water in the boards is evaporated away. Out from the dryer, the boards are gradually cooled down in the running process. The front sides of every two boards are folded after turnover, and the two ends are cut into boards with regular size and nice appearance by edge sawing machine. At the same time, the two ends of boards are packed by paper strips with fixed label. And finally the boards are conveyed to automatic stacking machine and stacked into well-ordered finished products.

China Gypsum Ceiling Board Production Line Details:

1. Annual output:

2 million to 10 million sqm(based on thickness of 9.5mm gypsum board)

2. Working time: 24hours/day and 300 working days/year

3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue

4. Fuel: Natural gas, LPG, diesel

5. Product quality and specification:

1) The product is in compliance with National Standard GB/T9775-2008 or equivalent international standard

2) Product specification:

Length: 2400mm~3600mm

Width: 1200mm or 1220mm

Thickness: 8mm-20mm

6. Main process:

1)Raw material blending;

2)Shaping;

3)Wet board/panel conveying;

4)Drying;

5)Dry board/panel conveying;

6)Finished product stacking and storage.

7. Main technology:

The production line adopts special designed direct hot air stove heating system

Related Products:Gypsum Board Production Line,Gypsum Powder Production Line,Gypsum Block Production Line,steel structural workshop.